RDL ST-RX2 Stick-On 1X2 Line Level Audio Routing SwitchThe ST RX2 has a single line level audio input and two line level audio outputs. In the absence of a control input, the NORMAL module output is fed from the audio input. When the TRIG control terminal is connected to ground, the input audio is fed to the SELECT output and the NORMAL output is switched off. When the TRIG terminal is again disconnected from ground, then the SELECT output is turned off and the NORMAL output is fed from the input. The

eliminating the need to run expensive and heavy analog snakes from the stage to front-of-house mixing positions

Brass and Woodwind

The cardioid e906 instrument microphone was especially designed for guitar amps and is also excellent for percussion and horns

Immunity from RF Interference

Only one of the audio inputs

Lifetime warranty

With the Model 47A's 2-wire interfaces able to supply up to 315 milliamperes (mA) of current on each channel

In the tradition of the popular Sanken COS-11 lavalier series

enabling great mobility when used as a backup recorder - perfect for transport to a variety of locations

So your studio remains clear of untidy cables

This allows intercom user beltpacks to serve as listen-only devices as well as functioning as a small party-line intercom system

This popscreen has minimal effect on sound quality