T-Slot Table 1200x800x200 Plasma nitrided with cross slots Leg standard equipment 650T Slot Table with horizontal vertical hole arrangement on the table top and a parallel hole pattern in a 100 mm grid on the sides, as well as M10 threaded boreholes and cross slots. Due to the cross slots spaced 100 mm apart, components with an elongated hole can be fastened in any position. For this purpose threaded clamp bushings and t nuts are required. We recommend using the T Slot Table for "clean" or spatter free welding tasks, since cleaning

Product number: 223400

90° or 45°

The general regulations for the use of shipping brackets must be followed

With the screw support (Item No

Product number: 220525

we recommend delivery of the Perforated Aluminum Plate together with the table

as well as free formed clamping surfaces

Product number: 280144

280859 for Leg standard equipment / Leg with Floor Anchoring System 28) (not included in the delivery) The specified load capacities refer to static load

Product number: 220630

The bolt head is equipped with a 10 mm hexagonal bit and the special screw is equipped with a 5 mm hexagonal bit

Product number: 000562