1-3/8" x 8' Closed and Closed Spelter Socket Wire Rope SlingA socket wire rope sling consists of a wire rope that is fitted with a socket on each end. This socket sling consists of spelter or poured sockets that are closed on each end. A closed spelter socket has a hole that can accept a pin or bolt. This Type 110 Spelter Socket has a 1 3 8" by 8' wire rope assembly with a closed spelter socket on each end. The length of this assembly is measured from pull to pull. Looking for different socket sling options?

Double D-rings and a 10K twisted snap hook make this two-leg strap perfect for quickly securing a corner on a special event tent

This 3/4" by 3' wire rope is fitted with a closed swage socket at each end

Clevis grab hooks for tie down use also available in a grade 100: Grade 100 Tie Down Chain and Binders

This 1-1/2" by 10' wire rope is fitted with a closed swage socket at each end

The added safety element from the use of the bolt/nut/cotter pin is the reason why this type of shackle is also known as a  safety anchor shackle

No minimum working load limit

See the 250 Ton Crosby® G-2104E or the 300 Ton Crosby® G-2104E

The curved surface contours to fit tires and features a raised diamond plate pattern

The type 404 tailboard is furnished with bronze bushings and meets or exceeds all requirements of ASME B30

This Type 110 Spelter Socket has a 1-3/8" by 18' wire rope assembly with a closed spelter socket on each end

26 requirements and also meets other critical performance requirements not addressed by ASME B30

With a master oblong link on top and flat sewn loops on both ends