Commercial vehicles. Wheel-hub attachment dimensions1 Scope This International Standard specifies the dimensions necessary for the attachment of a commercial road vehicle wheel on the hub of the vehicle whose fixing has six, eight or ten stud holes. This International Standard considers the flat attachment type with centring on central bore, which is the recommended type for future equipment. Other types are currently in use. The specifications do not imply that the wheel is interchangeable from one

6 Inspection

the properties of conductors in the final cable or cord differ from those of the original wire supplied Requirements for conductors taken from cable or cord are given inappropriate cable standards

— nominal 14 V

The purpose of ISO 4701 is to provide the user with a basis for any testing of iron ore and direct reduced iron involving size determination for use by contracting parties in the sale and purchase of these materials

IEC 62087-2 specifies signals and media that may be required to determine the power consumption of some types of equipment

— anonymous authentication mechanisms involving an online TTP

It covers chimneys that are cantilevered

for hazard-free and effective use

including those containing up to 5 % (V/V) fatty acid methyl ester (FAME)

long-term clinical experience of the use of the material referred to in ISO 5832-12 has shown that an acceptable level of biological response can be expected when the material is used in appropriate applications

BS 2782-6:Method 641Amentions density and relative density are used frequently

Provision of clarifications and corrections