Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results1 Scope This technical report describes two methods for the measurement of the sensitivity of single mode optical fibres to high power damage at bends: test method 1 Failure time characterisation as a function of the launch power and bend conditions (bend angle and bend diameter); test method 2 Equilibrium temperature measurement. Results from the two methods can only be compared qualitatively. The results in this report are predominantly on un cabled

Method of test for the determination of quasistatic fracture toughness of welds

performance criteria

and to assist manufacturers and erecting contractors by eliminating unnecessary minor variations in the demands of purchasers

Advances in modern medicine have led to a significant rise in the number of medical devices attached to patients

The major change in BS EN 60079-19:2019 is the addition of requirements for Type of Protection “i” requiring repair to manufacturers’ documentation and certificate requirements only

Aerodrome / helipad authorities

It is intended to be read in conjunction with ISO 1268-1

In-depth definition of processes which might be applied as part of establishing a partnership

Additional complementary rules are provided where necessary

BS EN 13631-15 helps you to manufacture high-quality high explosives for civil use

as well as the marking and identification of the products

PD IEC/TS 62773 itself consists in defining a procedure linking preconditions to some radio parameters