ND030-72 | ND030 Neutral Density Filter - Absorptive 50% TransmissionThe MidOpt ND030 72 is an absorptive neutral density filter with an optical density of 0. 3, or an average 50% transmission across the visible spectrum. These filters have identical male and female threads on both ends, allowing them to be stacked with other ND filters to achieve various optical densities. For example, two ND030 filters stacked together would perform approximately the same as one ND060 filter. All MidOpt filters can also be purchased

ITA204-GM-20C ITA204-GM-20C

Product Configuration Details + Collimated Not Collimated Wavelength 1200nm Infrared Diffused Not Diffused Polarized Not Polarized Lens Angle 10 x 50 Degree

LM6FC24M Technical Specifications:

0mm EXT-10

Brand Advanced Illumination Series LL137 Wavelength 850 Color Infra-Red (IR) Driver 24 Ingress Protection IP50 Length 12 in Lens Focus G Weight 1672g Can Be Strobed No Can Be Overdrive Strobed No Can Be Constantly On Yes Can Be Dimmed Not Dimmable Connection 2M Flying Lead Full Description

The LW300-940-L is Not Diffused and Not Polarized

The MidOpt Ni200-39 neutral density filter can be used to reduce the amount of light reaching the camera to an average of about 1% transmission

BL31318-45524 Specifications:

a 5 Pin M12 A Coded Male connector on the opposite end

Opto Engineering TCCXQ050-G

Brand Advanced Illumination Series DL194 Wavelength 470 Color Blue Driver I3S Ingress Protection Not Rated Working Diameter 78

This model is 300mm long and is in the 1300nm Infrared color