600cc Ignition Panel, '07 and UpHyper Racing # 146 591 Made from aluminum. Panels are cut and formed. No holes are drilled. Use your panels as a pattern and drill your own holes. We will mount sheet metal for an additional charge.

Threaded holes may require re-tapping of threads to remove powder coating material

Shackles are used to position the torsion arm at the correct angle for the correct progressive spring rate

Six 5/16"-18 threaded holes on a 5-1/4" bolt circle diameter

For use with double bearing carrier or double brake floater

Right Side

2" x 57" Long Splined Rear Axle fits 600cc Sprints

10 degree king pin angle

or under green while racing down the straight

easy to rebuild

Hyper Racing # 04-1425

Designed to make working on the X7 Jacob's ladder car a whole lot easier

and the styling is on trend