U-Bracket Adapter (pr), Front Swaybar 911/912/930 (1974-89)Description: Required for 914 without through body front swaybar, and all 1974 1989 911 912 & 930 Requires welding.

Input shaft bearing oilier

Technical Note: The M12 bolt through the Engine mount should be tightened to 40 ft/lbs or 55 Nm

Discounted price

or with S pipes on short headers (with 65 to 73 muffler spacing)

Allows for the necessary pivoting motion of the upper strut mount by not over constraining the top of the strut

The stock 911 battery is much heavier than necessary (upward of 40 pounds heavier than an Odyssey 680)

This competition series mount is installed within the original  mount

Note - Fits factory spring plates and AL trailing arms only

The front strut has 46mm piston and a 30mm shaft

Note: Some minor trimming of the factory plastic will be needed in order to complete install

4 Tender Springs

2 Rear Monoball Top Mounts