99161 - SKF Speedi-Sleeve - Max. Shaft Diameter 41.35mmWhen wear and damage occur on a shaft, SKF Speedi Sleeves are the solution. In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary, and, over time, will allow contaminants to enter the component and cause further damage to both the shaft and the component. Simply replacing the seal will not repair the damage to the shaft and

Cone Reference Assembly Number hm 231132 90036 Heavy-Medium Series Cone Reference Standard Part Assembly Number

72 13 CD GA HC P4A Light Series 65mm - Bore Size 15° Contact Angle

This 66200/66462 bearing is an imperial taper roller bearing

Look no further than the Timken 32010 Taper Roller Bearing

NJ 23 11 W Metric

231 40 EMB W33 C3 Medium Series 200mm Bore Size Cylindrical Bore 1-piece Inner Ring Guided Machined Brass Cage Lubrication Groove and Holes in Outer Ring Radial Internal Clearance Greater Than Normal

This 6236MC3 NSK bearing is a Open Type Deep Groove Radial Ball Bearing with a Machined Brass cage

HMS5 seals like the 95X125X12 HMS5V offer improved sealing performance through features like an optimized rubber outside diameter and spring-loaded sealing lips

The NA4922UU is a Standard Duty

68 24 C3 Metric

The NK38/20-XL is a Light Duty Open Type

This 1211ETN9/VK313 bearing is a double row