Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions1 Scope This Technical Specification specifies a compliance test for routine testing providing information on the leaching of monolithic waste which can be obtained under the experimental conditions specified hereafter with a single batch leaching test at a specified liquid to surface area ratio (L A) of 12 (cm3cm 2). It applies to test portion of monolithic waste of regular shape, with a minimum dimension of 40 mm in all directions, obtained e. g. by

What is BS EN 17123 about

BS EN 80000-13 covers names

mechanical and environmental test methods for these devices

Earth monitoring system manufacturers

8:1981 which is withdrawn

8 Test report

Intravenous injections manufacturers and suppliers

which should generally be carried out before testing the accuracy

It can be applied in:

BS ISO 6432 and BS ISO 15552

This British Standard recommends a code of practice for earthworks forming part of general civil engineering construction such as highways

It leads to the availability of competitively priced data communication products based on TASE