40 3-NO30 - RENOLD 1/2 Inch Pitch Premier Standard LinkDouble cranked links are available for most sizes and types of chain. The unit consists of an inner link (No. 4), with cranked links retained permanently in position by a riveted bearing pin. Screw operated extractors break chain by forcing the Renold end softened bearing pins out of the outer link plates. For other brands of chain, the rivet swell must first be ground away.

This 6216 FAG bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 80x140x26

Extra Light 130mm - Bore Size Rubber Seals on Both Sides of Bearing Normal Internal Clearance

This Simplex chain has a 5/8 Inch pitch and is 5m in length

62 09 DDU Light Series 45mm - Bore Size Rubber Seals on Both Sides of Bearing Normal Radial Internal Clearance

This QJ308MA bearing is a a four point contact bearings with a machined brass cage with the outer ring centred and a normal internal clearance

33 07 A 2RS1 TN9 W64 Maximum Capacity

The design of the NJ220ECP/C3 SKF bearing ensures even load distribution and carries heavy radial loads while maintaining a low cross-sectional height and low friction

Medium 160mm - Bore Size Contact Angle 40° Contact Angle Standard Capacity Machined Brass Cage Universal Mounting

Non Contact Rubber Seals on Both Sides of Bearing

12 22 K M C3 Extra Narrow 110mm - Bore Size Tapered Bore Open Type Solid Brass Cage Radial Internal Clearance Larger Than Normal

This 71810CD/P4DGB bearing is a Super Precision angular contact bearing with a 15° contact angle and a high capacity design

618 13 2RZ Y Metric