Warrior Gabriel Rear Fire Brick SetThe rear fire bricks for the Warrior Gabriel sit at the back of the firebox, taking the most direct heat from the fire. This set is cut to fit the Gabriel's firebox dimensions and covers the rear brick position only. The Gabriel is a 5kW compact stove from Warrior Stoves sold in the UK and Ireland. Compatible with: Warrior Gabriel 5kW non boiler stove (WS Gabriel 20) Specifications Material: Vermiculite Heat resistance: 1200C Part type: Rear fire

Baffle plates wear down with sustained use and should be checked regularly for cracks or warping

The brick is shaped to fit the right-hand wall of the Precision 5902 exactly

When the existing rope seal hardens

The short leg set raises the Olymberyl Aidan off the hearth and provides the correct clearance for ash pan removal and air intake from beneath the stove

A damaged flue collar can allow combustion gases to escape at the top of the stove rather than travelling up the flue

so wear over time is normal

which is essential for managing burn rate and fuel consumption

eventually allowing air to bypass the door and enter the firebox uncontrolled

Replace it if it cracks deeply or begins to break up

cushioning the glass and preventing hot gases from leaking past the door

thermic adhesive

Replacing worn hinges restores proper door alignment and sealing