LP610-67 | LP610 Red Longpass FilterThe MidOpt LP610 67 is suitable for use with a monochrom camera and intended to pass both red and near infrared wavelengths. When red LED lighting is used, a BP635 or BP660 Bandpass filter is usually more beneficial. In either case, longer infrared wavelengths can generally have a negative effect on contrast. These filters have also seen use in single camera NDVI imaging applications as an alternative to Wratten 25 or 25A filters. However, for such

This model is 300mm x 300mm and emits 470nm Blue color

Specifications + Useful Range Min 380 nm Useful Range Max 850 nm Stabledge Yes Secondary Useful Range Min 380 nm Secondary Useful Range Max 850 nm Third Useful Range Min 380 nm Third Useful Range Max 850 nm Adhesive Backed Yes Tolerance 10 % Peak Transmission ≤ 98 % Surface Quality (Scratch-Dig) 80-50 Substrate Material Acrylic Filter Diameter M49 x P0

Electrical Characteristics + Voltage 24 VDC V Max Input Power Constant On 13

Brand Advanced Illumination Series LL232 Wavelength VARIES Color VARIES Driver 24 Ingress Protection Not Rated Length 650 mm Weight 1776g Can Be Strobed No Can Be Overdrive Strobed No Can Be Constantly On Yes Can Be Dimmed Not Dimmable Connection 2M Flying Lead Full Description

ENDVI analysis may

3 mm FoV Detector Long Side Vertical @ 2/3″ 45

17 mm FoV @ 1″ 136

USB 2 Cable with USB-A connector to 7 meter HI FLEX cable to Mini USB-B w/Screws connector

The LCZE300-530-L-DC is Not Polarized

RL208W-160455I3S Specifications:

Electrical Characteristics + Voltage 24 VDC V Max Input Power Constant On 17 W Max Strobe Latency 10 us Max Strobe Duration No Limit Max Strobe Frequency 4000 Hz Max Strobe Duty Cycle 100 % Min Strobe Duration 30 ms Max Duty Cycle 100 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 20 mA NPN Trigger Voltage < 1 VDC V NPN Trigger Current 15 mA

TC10M120-J Technical Specifications: