PFAFF® Strap and Belt Loop FootWith the Strap and Belt Loop foot, create straps and belt loops easily using a cover stitch. Just put a strip into the foot and the strip is folded automatically and stitched in place. Compatible with the PFAFF coverlock 4. 0, 3. 0, and admire air 7000 Coverlock Machine models. How to use: 1. Set the machine for a Coverstitch wide. 2. Use the default stitch settings. Adjust if needed. 3. Cut a strip of fabric, 25mm (1) wide. 4. Cut the top corner of

using a special needle that felts the fibers together

which guarantees an absolutely even fabric feed from both the top and bottom as well as perfect seams with any fabric

This foot also allows for various stitch lengths and widths

Stitch type: Three-thread overlock or four-thread overlock

The fabric is raised by the blade during sewing to make the tucks higher and more visible

embroidering or experimenting with the creative™ Bobbin Case – you can never own too many Bobbins

stretches 6 to 12 mm wide elastic and sews it in place

The non-corrosive finish adds durability and easy cleaning to these stainless-steel scissors

Guidelines to turn corners for ¼" (6 mm) or 1⁄8" (3 mm) seams

Place screws in holes from the top

Slide the fabric to the back underneath the presser foot and the needles

DESIGNER EPIC™ 2