Explosives for civil uses. Detonators and relays - Determination of series firing current of electric detonators1 Scope This European Standard specifies a method to determine the reliability of electric detonators connected in series, when the manufacturers stated series firing current is applied. The test method does not apply to magnetic coupled detonators and electronic detonators.

BS EN 464 is a European standard in protective clothing that discusses the test method for the determination of leak-tightness of gas-tight suits to ensure protection against contaminated air at the workplace

BS EN 4835 is a European Standard that specifies the installation and removal requirements for adaptors and reducers

What is BS EN 12094-16 – Odorizing devices for CO2 low pressure systems about

A taper pin is a tapered rod of metal or hardwood used as a dowel to locate one part with reference to another or to secure two parts together by driving into a tapered hole passing through both parts

the part is tested in accordance with the relevant standard as far as reasonable

It is only concerned with as-sintered pellets with cylindrical bores intended to be used for application groups A to F as defined in ISO 1684

Cables specified in this British Standard are intended for use in fixed installations in industrial areas

BS EN 1809 discusses mandatory features

Incident response team (IRT)

taking account of the need

BS EN 12390‑8 on the depth of penetration of water under pressure for testing hardened concrete is applicable for:

11 and to a lesser degree clause 13