MAD Wurks Carbon Split Narrow Front Topdeck 2mm Schumacher Mi9/Mi10 (1)MAD Wurks Carbon Split Narrow Front Topdeck 2mm Schumacher Mi9 Mi10 (1) For a more direct feel, leave the front bulkhead flex connector in place. If the front end is too aggressive, you can cut out the bulkhead flex connector.

Schumacher Mi9 drivers

5mm wrench

If you are running one of the front braces with more flex

MAD Wurks 1 Piece Reinforced Front Upper Bulkhead SP1 (1)

Make sure you put your car back on the setup station and adjust for the correct rear toe as well as toe gain

The wave adds stability on corner entry under load

1 - Schumacher U7938 - Chassis Post 8mm (pair)

(1) Rear Shock Tower Body Mount

The MAD Wurks rear shock tower body mount for the Mi9 allows you to run both vertical (Xray X4 rear body mounts xra301336) as well as horizontal rear mounts (any standard body mount ex

These braces provide a smoother less aggressive entry into the corner while maintaining better corner speed than removing the bulkhead brace entirely

6mm top deck

MAD Wurks SP1 -4mm Rear Steering Arm (2)