Electromagnetic compatibility (EMC) - Limits. Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems1 Scope This Technical Report, which is informative in its nature, provides guidance on principles which can be used as the basis for determining the requirements for the connection of distorting installations to MV, HV and EHV public power systems (LV installations are covered in other IEC documents). For the purposes of this report, a distorting installation means an installation (which may be a load or a generator) that produces harmonics and or

is supplied by the field device manufacturer with its device

Eddy current testers

This European Standard does not cover factory made rigid polyurethane (PUR) or polyisocyanurate (PIR) foam products or in-situ products intended to be used for the insulation of buildings

where a female taper (see ISO 1089) is used to fix the cap to an electrode adaptor (see ISO 5183-1 and ISO 5183-2)

Installation teams of electrical equipment

This Publicly Available Specification (PAS) specifies the requirements for the provision of ICT facilities and services in a workplace

BS EN 50117-10-2 provides test methods and requirements for fire performance of cables

which also contains in the Annexes protocols to be used for initial type testing of asphalt materials in accordance with BS EN 13108-20

Why should you use BS 5550-7

and end-of-life

EN 50303:2000

2 Colorimetric values