MG ZS180 KV6 Power Steering Pump (Press Fit Pipes) - QVB000370 - Genuine MG RoverIn stock. This is the Genuine MG Rover Power Steering Pump as fitted to Rover 45 and MG ZS180 models fitted with the KV6 engine (both 2. 0 and 2. 5 KV6). Brand new 'old stock' that has been correctly stored and recently re discovered! This will only fit MK2 cars with the later pump; it will not fit earlier cars. If you have a Mk1 vehicle you'll need to use the KV6 pump designed for the 75 ZT and modify the cambelt cover to suit. You can view the

Fitment MG6 - All models

8 and Diesel (inc Coupe)

sourced from a UK supplier

4x Upper Manifold Seals and 4x Lower Manifold Seals

and these kits are by far the best

Please note these are a solid pulley with no rubber damping - the design was revised for the TCI Tech engine

Most aftermarket shoes are a poor fit - these ensure full contact and best handbrake operation

This is the Bump Stop / Aid as fitted to the Rear Damper of all Rover 75 and MG ZT models - commonly replaced when changing the Damper as they degrade with age

If you need the Exhaust Studs and Nuts (often replaced while changing these gaskets) we have them here - Exhaust Studs and Nuts - V8

you need a new ballast module

supplied and priced as a pair

This radiator requires the blanking plugs from your old radiator to be re-used