AHX120-SR-100 | Belimo | Damper ActuatorConfigurable, Damper Actuator, 101 lbf [450 N], Non fail safe, AC 100 240 V, DC 2 10 V, cable For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturers specifications. The actuator operates in response to a 2 to 10 VDC, or with the addition of a 500 ? resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for

spring return (fail-safe)

NTC10k3 (Precon)

The actuator operates in response to a DC 2

The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage

or contact) serve as an analogue/digital converter for the digital transmission of the sensor value to a higher level system

Supervisor 0 - Initial 18 month maintenance must be purchased in conjunction with initial Supervisor software

24 to 240VAC

This valve is suitable for use in a hydronic system with variable flow

This series is specifically designed to offer superior performance paired with simple installation and use

EV500S-495 + GRX24-EV Belimo Energy Valve®

JACE 8000 200 Device Core Software Only & 10000 Points

180 in-lbs [20 Nm]