Kit Basic, Hard-Line40 6 Carbide tipped annular cutters: drill depth 40mm, Weldon- shank 19mm (3/4'), 2 pcs each Ø 5/8', 13/16', 15/16' 2 ejector pins 6,34x90mm for 5/8' 2 ejector pins7,98x90mm, for 13/16'- 15/16'Kit Basic, Hard Line40 6 Carbide tipped annular cutters: drill depth 40mm, Weldon shank 19mm (3 4'), 2 pcs each 5 8', 13 16', 15 16' 2 ejector pins 6,34x90mm for 5 8' 2 ejector pins7,98x90mm, for 13 16' 15 16'

For retaining screw DIN 6367

8x30mm 68 TFP - PH: UNI1+UNI2

Tungsten carbide burr Blue-Tec coated WRC/ HP-4 d1=3 / l2=14 / d2=3 / l1=100mm

8x80mm 24 FZ+R - 2xA PH: d=80 / 1=14x5 / 2=22x6

Tungsten carbide burr uncoated KEL/ HP-1 d1=12DIN / l2=25 / d2=6 / l1=70mm

Tungsten carbide burr uncoated WKN/ HP-2 d1=10 / l2=10 / d2=6 / l1=55mm

Tungsten carbide burr Blue-Tec coated MICRO RBF / HP-11 d1= 6

Tungsten carbide burr uncoated ZYB/ HP-6 d1=16 / l2=25 / d2=6 / l1=70mm

Blue-Drill Line55 d=33mm

Tungsten carbide burr uncoated RBF/ HP-1 d1=8 / l2=20 / d2=6 / l1=65mm

Blue-Line55 d=43mm

Tungsten carbide burr Blue-Tec coated KUD/ HP-2 d1=3 / l2=2