Coil coated metals. Test methods - Adhesion of strippable filmsWhat is BS EN 1352317 Adhesion of strippable films about? BS EN 13523 series covers coil coated metals. BS EN 1352317 is one of the parts of a series of documents that specifies two methods for determining the numerical evaluation of the adhesion of strippable films which have previously been applied to an organic coating on a metallic substrate. Samples can be tested irrespective of whether the strippable film has been applied in the laboratory or on

BS 3935 specifies the requirements for grading raw cattle hides and calfskins by appearance and mass in their fresh or preserved state intended for tanning

BS EN 13791 provides requirements for determining the in-situ strength at test locations and the

BS EN 4531-101 on electrical connectors for EN 4641 multimode cable -55 °C to 125 °C is useful for:

the provisions of this document take precedence over the provisions of ISO 4254‑1 for machines that have been designed and built according the provisions of this document

Requirements additional to those specified in this document may be necessary for

the electropolishing removes a small but finite amount of metal from the surface that

permeability to water vapour

horizontal spindle boring and milling machines having a movable column and movable table

a) transmission of audio frequency vibrations to a structure

8) has substantial periods of minimal or partial use

Why should you use BS EN 3475-603 - Resistance to wet arc tracking

What is BS EN 61095 - Electromechanical contactors about