RF Venue Optix Series 3 - Dual Channel RF Over Fiber KitOPTIX Series 3 is a high performance RF to fiber optic (RFoF) conversion system designed to facilitate the remote placement of wireless audio antennas. The OPTIX Transmitter module converts RF signals arriving from an antenna source into a singlemode optical signal, sending that signal down a length of fiber optic cable to the OPTIX Receiver module which converts the source signal back into RF. Without any signal loss over the optical cable, the OPTIX

BlueBridge® devices need to be connected to the network during set-up and if control is required but can be applied in many instances where network control is unnecessary or unavailable like live speech applications

And if you use PreSonus' Studio One DAW software

874" Music Sheet Holder is adjustable

9mm plywood construction with laminate protective exterior

and unmatched audio clarity free from input jitter

plus all Dante devices from hundreds of manufacturers

8-inch coaxially mounted woofer and a center-firing 1-inch compression driver

the Model 370A's two audio output (Dante transmitter) and two audio input (Dante receiver) channels can be interconnected (routed) with other devices using the Dante Controller software application

Theme Park

The ADM has a die-cast zinc body with a steel and brass grill assembly

What's In The Box:

This is possible only through the "binauralization" of a stereophonic array-a technique that is already well established in audio for games