Hongfa Power Relay 250V AC 10A HF32FV-GPower Relay 250V AC 10A HF32FV G uses an electromagnet to open or close a circuit when the input (coil) is correctly excited. It can provide a high level of isolation between the control signal (coil) and the output (contacts). An electromagnet is the heart of a relay (a coil of wire that becomes a temporary magnet when electricity flows through it). 10A switching capabilities, 4kV dielectric strength (between coil and contacts), and an

The Peripheral Touch Controller (PTC) acquires signals in order to detect a touch on capacitive sensors

At the logic level

Battery-Powered Vehicles

Tactile push button switch is Normally Open switch

7 ohm Color Code Yellow

1 V/µs Input Offset Voltage  2

This 4 pin push switch is a latching type with three modes of operation and it is generally used in a torch where pressing a button for the first time turn ON the light when it is pushed for the second time torch's light beam changes and the third press turns OFF the torch

15 PINS) [Can be used to connect sensors and LCDs]

Gold Brand As per Availability/ Request Type Carbon Film Resistor Quantity 5000 Pieces Tolerance 5% Power 1/8 Watt

Connector Type Single Row Header

Good electrical conductivity and comfortable sense of touch

Colour Black