Mini Strymon Tap Tempo SwitchA tap tempo switch is pretty simple bit of kit which can be priceless, and this one is wired to work with the Strymon BigSky, Deco, DIG, Flint, Mobius, TimeLine, or Volante. The pedal is built with: Aluminium enclosure Neutrik plug socket Soft touch heavy duty footswitch Point to point wiring Enclosure dimensions: 92x38x31mm

Here's a single true bypass loop in a small enclosure

The 5 gang patchbox has a top to top socket layout and is totally passive so no power required

there is also a TRS footswitch gang for if it is ever needed

You will need a mono 1/4" cable to connect the pedal to your amp

1mm 9v centre negative DC Socket (150mA draw)

You'll need a stereo patch cable to connect the footswitch to your Red Panda pedal

in both the flat and wedge shapes

Snapshot Up/Down

Please note if your Marshall amp's stock footswitch does not have an LED then this footswitch will not be compatible with your Marshall

Master Bypass - Add a switch to bypass all of the loops leaving just your clean signal

right to left

All that you need is a stereo cable to connect it to your pedal or amp